Aluminium Tapes
"There's an - IDEAL SOLUTION - for virtually every job, in every environment".
We use this statement because we know it's true. Confidently seal seams between ducts, pipes, insulation and jacketing in today's demanding residential and commercial refrigeration and heating systems, is a job we do for over 35 years, and we do it well.
Our specialized HVAC tapes adhere immediately and remain in place even in the most extreme fluctuating conditions.
Our tapes will create secure moisture barriers that will combat rust, mold and contamination for years. A lot of them meet the codes and standards needed in your specific area.
Check them out !!!
HVAC Tapes |
488 ECO | Description: | 488 ECO is a dead soft aluminium, 30 µm, pressure sensitive adhesive with a removable paper liner. Conforms over irregular surfaces and assures a firm and long lasting bond. |
Applications: | designed for sealing duct and dual temperature insulation materials faced with aluminum. The foil bends with the facing and gives a strong, matching look. At the same time, taped joints assure the integrity of the insulation. |
| silver |
|
Image  |
|
488 AWF | Description: | 488 AWF is 50 µm, alloy aluminium foil with a pressure sensitive adhesive and a paper liner. Conforms to irregular surfaces such as FSK facings and blends with the basic facing pattern. Foil as a vapor barrier assures integrity of the insulation system. The aggressive adhesive assures a durable performance. |
Applications: | designed for use with fibreglass duct-board and on all seams and joints. It provides a dependable vapour barrier when applied to clean, dry surfaces. |
| silver |
|
|
|
877 | Description: | 877 is an aluminium foil coated on one side with an acrylic adhesive and protected with a siliconized release liner. The acrylic adhesive requires no moisture, heat or special preparation prior to application. |
Applications: | designed for sealing seams and joints on metalized facings of insulation materials. It completes the vapour retardant layer at these locations to assure the integrity of the insulation system. |
| silver |
|
Image |
|
Ideal Seal 2000 | Description: | Ideal Seal 2000 is a 50 µm aluminium foil with pressure sensitive adhesive manufactured and imprinted to comply with UL181A-P and UL181B-FX performance and identification requirements. |
Applications: | designed to insure fiberglass ductboard system integrity.
It is used on all joints to assure the vapor barrier integrity of the duct system. |
| silver |
|
|
|
489 | Description: | 489 is a 75 µm aluminium foil with pressure sensitive acrylic adhesive. It is available self wound or on a liner.
Meets federal Specifications for LT-80-B and Military Specification MIL-T-23397 B. |
Applications: | designed to be used as a water proofing vapor barrier and air leakage protection. High reflectivity assures effective heat light interference and electrical isolation shielding.
Excellent protection for masking operations in electroplating and paint stripping. |
| silver |
|
Image |
|
499 | Description: | 499 is a 30 µm, high tensile strength aluminium foil backing, combined with a high performance synthetic rubber-resin adhesive, protected by an easy-release silicone release paper liner. |
Applications: | designed for use in the HVAC industry for joining and sealing Foil-Scrim-Kraft facing laminated fiberglass blanket/ duct board joints and seams. It is also used for joining and sealing flexible air duct seams and connections. |
| silver |
|
Image |
|
491 FSK | Description: | 491 FSK is a Foil, Skrim and Kraft tape combined with a pressure sensitive adhesive and a release liner. Assures positive seal to maximize insulation integrity. |
Applications: | designed for sealing cold and dual temperature duct seams and joints where FSK is the basic insulation facing. The skrim bends with the primary facing and gives a strong and finished look. |
| silver |
|
|
|
591 FSK | Description: | 591 FSK is a liner free multi-layer foil laminate system designed to seal and protect duct seams where FSK is used as the primary insulation facing. UL Class 1 rated – meets or exceeds all UL 723 requirements. |
Applications: | designed to be applied directly from the roll. The liner free
construction provides significant gains in application efficiency and safety to the contactor, while also reducing waste and clean up time on the job site |
| silver |
|
|
